How to maintain a full range of vacuum coating equipment

Vacuum coating equipment uninterrupted use more than 12 months, vacuum coating machine inside the pumping speed will slow down, it would have to in a timely manner vacuum coating equipment cleaning work. Vacuum coating apparatus is first filled into the atmosphere, remove the pipe coupling, the nozzle plate and remove the furnace. Vacuum coating, vacuum coating equipment pump chamber and a pump bladder washing three times, first with gasoline to clean again, detergent and then washed again, and then cleaned thoroughly with water. After vacuum coating equipment to be dried, re-join the oil pump, the pump installed guts and replace the body, you can reboot.

Vacuum coating equipment before rebooting, pay attention to leak detection work. Vacuum coating machines, vacuum coating equipment to maintain the pump starts, shut the door, after a few minutes to observe the diffusion pump, a partial vacuum coating equipment vacuum level reaches 6X10 Pa, or to check for leaks. Check vacuum coating, vacuum coating equipment if installed at a coupling gasket, seal, or crushed. Vacuum coating apparatus before heating to exclude leakage risks after, will burn the oil diffusion pump or a ring, can not enter the working state.

Vacuum coating apparatus 200 of each completion of the above coating process, a working chamber should be cleaned. Vacuum coating apparatus roughing pump will continuously for 30 days renewal oil. The old oil in the vacuum pump is completely discharged coating equipment. Vacuum coating equipment playback threaded bolt oil, fresh oil was added to the rated amount.

Zunhua Baorui Titanium Technology Co., Ltd. is committed to the development and production of vacuum coating machines, vacuum coating equipment, the latest technology and constantly create vacuum plating equipment to meet the needs of the market, providing customized technology solutions and coating equipment for the industry.