How to choose vacuum coating equipment company for vacuum coating machine?

With the skills of the vacuum coating machine, the design of the hard film is moving toward a diversified, multi-layer film. Become the coating technology of choice for modern companies. Today, after a thorough analysis by experts from the China Vacuum Association, we will give specific answers. The normal operation of the original coating machine should refer to the instructions in the operation manual. But the rough operation procedure, let's talk about it briefly:

1. Check if the operation control switch of the vacuum coating equipment is in the "off" position.

vacuum coating machine,pvd coating machine,pvd vacuum machine,vacuum ion coating machine,multi-arc ion coating machine

2. Turn the main power switch on and the vacuum coating equipment to send power.

3. Pull the low pressure valve out. Open the inflation valve, after hearing the airflow sound, start the riser bell valve and the bell jar rises.

4. The device is fixed with a tungsten spiral heater. The PVDF film and the aluminum cover are attached to the rolling disc. The aluminum wire is placed in a spiral heater. Clean all parts of the bell jar to ensure that there are no impurities.

5. Drop the bell.

6. Start vacuum pumping equipment for vacuum coating equipment.

7. Turn on the composite vacuum gauge power supply (composite vacuum gauge type: Fzh-1A).

vacuum coating machine,pvd coating machine,pvd vacuum machine,vacuum ion coating machine,multi-arc ion coating machine

8. Multi-Arc Ion Coating Machine When the pointer in the “2” of the low vacuum gauge moves clockwise to 6.7Pa again, the low pressure valve is pushed in.

9. The vacuum coating equipment registers the cooling water, starts the dispersion pump, and heats for 40 minutes.

10. The low pressure valve is pulled out. The vertical single-door coating machine repeats the 7-action program: the lower left knob "1" turns to point to the 2-section measurement position. The pointer in the "2" of the low vacuum gauge moves clockwise, and when the pointer moves to 6.7 Pa, the high pressure valve is opened.

How to choose vacuum coating equipment company?

vacuum coating machine,pvd coating machine,pvd vacuum machine,vacuum ion coating machine,multi-arc ion coating machine

How to choose vacuum coating equipment company? The vacuum coating equipment maintenance is not good, and has a direct relationship with the strength of the vacuum coating equipment company. The more professional the company, the better the vacuum coating equipment maintenance and repair effect.

First, experience. The vacuum coating equipment maintenance is the same as many other skills. The vacuum coating equipment company with rich experience can cope with various situations to ensure good results.

Second, the success story. The vacuum coating equipment maintenance case is also one of the most direct strength witnesses. Vacuum coating equipment maintenance is still the actual operation. This includes not only the vacuum coating equipment itself, but also professional configuration like vacuum coating equipment. After all, the configuration is An important prerequisite for the maintenance of vacuum coating equipment.

vacuum coating machine,pvd coating machine,pvd vacuum machine,vacuum ion coating machine,multi-arc ion coating machine

Third, after sales service. After-sales service is also a powerful and important guarantee for the maintenance of vacuum coating equipment. Perfect after-sales service is part of the maintenance of vacuum coating equipment.