How do vacuum coating machines clean and maintain the application of coating technology?
Vacuum coating equipment will be used for a long time. If it is not protected, the operation efficiency will be low, the coating quality will be deteriorated, and the pumping speed inside the machine will be slow. If it is not cleaned in time, the consequences will be serious. Atmosphere, remove the connecting water pipe, clean the pump chamber and the pump well, clean it with detergent, and finally clean it with cold water, dry it in the future, add the pump oil from the head, and then install all the equipment. It can be used from the beginning!
In the future, it is necessary to pay attention to the operation of cleaning from the beginning, pay attention to check the operation of oil leakage, start to maintain the pump, close the door, and after a while, see if the dispersing pump reaches the vacuum pump 6*10 Pa, if there is no need to check the leak from the beginning. Also check that there is a sealed rubber ring at the joint to eliminate the hidden danger of gas leakage, and it will be able to heat up, otherwise it will cause the dispersing pump to burn out and there is no way to operate normally!
vacuum coating machine,pvd coating machine,pvd vacuum machine,vacuum ion coating machine,multi-arc ion coating machine
Originally, we not only need to clean the vacuum coating machine, but also clean the vacuum chamber. The cleaning vacuum chamber can repeatedly wipe the inner wall of the vacuum with a caustic soda saturated solution. (Be careful not to directly contact the caustic soda solution to avoid burns.) The intention is to make the plating. The film material aluminum reacts with the caustic soda. After the reaction, the film layer falls and hydrogen gas is released. Then the clean room is cleaned with clean water and the dirt in the fine valve is cleaned with cloth and soaked. The vacuum chamber will be cleaned in the future. It is.
The vacuum coating equipment manufacturers warmly remind that the rough pump in the vacuum coating equipment will continue to work for one month and need to be replaced with new oil. It is necessary to rush the oil in the pump and then put in new oil, so that the coating machine can work normally. !
In which areas is coating technology applied?
vacuum coating machine,pvd coating machine,pvd vacuum machine,vacuum ion coating machine,multi-arc ion coating machine
In which areas is coating technology applied? The vacuum coating machine equipment factory pointed out that with the continuous research on coating technology, the application scope of coating technology is wider.
Metal cutting tools, in life, often see a variety of tools such as drills, milling cutters, molds, etc. This is the coating tool after processing by coating technology.
Coating technology on building and automotive glass, coated with a layer of TiO2, can be turned into anti-fog, anti-dew and self-cleaning glass. This process has a good application on automotive glass.
vacuum coating machine,pvd coating machine,pvd vacuum machine,vacuum ion coating machine,multi-arc ion coating machine
In solar energy, in order to effectively utilize solar thermal energy, it is necessary to effectively utilize solar thermal energy, which requires coating a special surface with a coating technique.
Applications in optical instruments: familiar optical instruments microscopes, cameras, range finder, mirrors, glasses, magnifiers, etc. in daily necessities, all of which are inseparable from coating technology, and the coated film has a reflective film. Several types of membranes and absorbent membranes.
Application in the field of information storage: The film material is recorded as information on the storage medium, which has its unique advantages. The magnetization reversal is extremely rapid, and the bistable state parallel to the film surface is easy to maintain.
Applications in integrated circuit manufacturing: protective layers, electrode lines, etc. in transistor circuits are mostly CVD technology, PVCD technology, vacuum evaporation metal technology, magnetron sputtering technology and RF sputtering technology.